Manufactured under stringent EN 14509 and ISO 9001:2015 quality standards, our products integrate continuous roll-forming steel skins with dense fire-resistant rockwool, polyurethane, and EPS cores to ensure total envelope integrity.
Procuring industrial sandwich panels in Greece requires rigorous harmonization between Greek Energy Performance Regulations (KENAK), the Hellenic Fire Safety Code (Presidential Decree 41/2018), and high seismic lateral force mitigation (Eurocode 8).
Under Greece's revised KENAK framework, industrial, commercial, and logistics buildings must satisfy strict overall thermal transmittance (U-value) thresholds ranging between 0.22 W/m²K and 0.35 W/m²K. Our high-density rockwool panels (100 kg/m³ to 120 kg/m³) achieve exceptional thermal conductivity ratings ($\lambda = 0.038\text{--}0.040\text{ W/mK}$), eliminating thermal bridging through tongue-and-groove micro-labyrinth joints and safeguarding facilities against intense Mediterranean summer solar gain.
Greek Fire Protection Regulations strictly mandate non-combustible building materials for logistics hubs, manufacturing plants, pharmaceutical facilities, and crowded commercial hubs. Our rockwool panels are rated Euroclass A1 and A2-s1,d0 in accordance with EN 13501-1. They generate zero flaming droplets, emit negligible smoke, and withstand direct temperatures exceeding 1,000°C, providing structural partition fire resistance from EI 60 up to EI 240 minutes.
Situated in the most seismically active zone in Europe, building structures across Central Greece, Attica, the Peloponnese, and the Ionian Islands must minimize structural dead loads to reduce destructive inertial acceleration during ground motion. Our composite rockwool panels combine lightweight structural rigidity with slotted fasteners, accommodating dynamic inter-story drift and seismic shear without envelope delamination.
Fire Integrity / Insulation
Core Basalt Wool Density
Acoustic Reduction ($R_w$)
Marine Saline Coating Grade
Certified according to EN 14509 standards, our mineral rockwool insulated panels are calibrated for load-bearing performance, thermal optimization, and acoustic isolation across Greek climatic zones.
| Panel Nominal Thickness | Core Density | U-Value (W/m²K) | Fire Classification (EN 13501-1) | Acoustic Insulation ($R_w$) | Max Span (Wall, $L/\Delta 200$) | Recommended Greek Application |
|---|---|---|---|---|---|---|
| 50 mm | 100 - 110 kg/m³ | 0.72 W/m²K | EI 30 (A2-s1,d0) | 29 dB | 3.80 m | Internal Industrial Partitions, Workshop Dividers |
| 80 mm | 100 - 120 kg/m³ | 0.46 W/m²K | EI 60 (A1 / A2-s1,d0) | 31 dB | 4.90 m | KENAK Zone A External Cladding, Cleanrooms |
| 100 mm | 100 - 120 kg/m³ | 0.37 W/m²K | EI 120 (A1 Non-Combustible) | 33 dB | 5.75 m | Logistics Hubs in Aspropyrgos, Sindos Industrial Area |
| 120 mm | 110 - 120 kg/m³ | 0.31 W/m²K | EI 180 (A1 Non-Combustible) | 34 dB | 6.40 m | Heavy Chemical Storage, Northern Greece (Zone C/D) |
| 150 mm | 120 kg/m³ | 0.25 W/m²K | EI 240 (A1 Non-Combustible) | 35 dB | 7.20 m | High-Risk Fire Barrier Envelopes, Server Centers |
From the industrial logistics corridors of Attica to maritime resort islands and agricultural processing plants in Thessaly, our building systems are designed to withstand specific microclimatic challenges.
The strategic expansion of Greece's logistics spine along the Piraeus-Thessaloniki axis demands massive, secure warehouse space. Logistics developers in the Thriasio Pedio (Aspropyrgos, Elefsina, Mandra) and the Sindos Industrial Park in Thessaloniki require rapid construction of high-bay distribution hubs. Our continuous-line rockwool panels span up to 7 meters between purlins, minimizing secondary steel weight while providing non-combustible EI 120 boundary ratings required by institutional real estate funds.
Greece’s agricultural export backbone—feta production in Larissa, olive oil mills in Kalamata, and fruit canning in Central Macedonia—operates under intense HACCP and hygiene inspections. Our sandwich panels feature specialized food-safe plastisol coatings (PVC/PVDF 120µm) combined with anti-microbial treatments. The non-absorbent basalt wool core prevents moisture entrapment, mold growth, and pest penetration, ensuring temperature-regulated cleanroom processing environments.
Facilities positioned near the Aegean or Ionian coastlines confront harsh marine atmospheric salinity (ISO 12944 class C4/C5-M). Conventional zinc coatings rapidly deteriorate under cyclic salt fog, humidity, and intense UV exposure. PTI manufactures sandwich panels with pre-painted hot-dip galvanized steel (Z275/Zn-Al alloy) coated with 50µm Polyurethane-Polyamide (PUR-PA) or PVDF 70/30 resin coatings, providing 25+ years of verified anti-corrosive facade resilience.
The modernization of Greece’s building sector is accelerating through national decarbonization initiatives, institutional green building standards, and modular infrastructure demands.
Institutional Greek development companies like Dimand, Prodea, and Lamda Development mandate LEED Gold or Platinum certification for flagship projects, including the landmark Ellinikon urban redevelopment. Our rockwool panels contain up to 40% recycled basalt content, emit zero VOCs or chlorofluorocarbons, and offer full cradle-to-gate Environmental Product Declarations (EPD) to maximize green building credits.
High sea shipping volumes through COSCO’s Piraeus Container Terminal have created severe shortages of modern class-A dry and ambient warehouse stock. Prefabricated portal steel frames paired with interlocking rockwool cladding reduce on-site installation schedules by up to 60% compared to traditional reinforced concrete infill, accelerating capital payback for Greek 3PL operators.
Luxury resort development across Crete, Mykonos, Santorini, and Rhodes faces strict municipal fire safety mandates and high seasonal energy costs. The GloStar acoustic rockwool panel system delivers sound absorption coefficients ($\alpha_w = 0.90$) and weighted sound reduction ($R_w \ge 35\text{ dB}$), isolating heavy HVAC mechanical equipment rooms and event pavilions in luxury leisure environments.
Operating our continuous production facility in Barka since 2009, Paneltech International LLC provides direct industrial manufacturing accountability from raw coil processing to custom port delivery in Greece.
Our Barka industrial factory operates high-speed, continuous double-belt lamination lines. Rockwool slabs are automatically sliced, rotated 90 degrees for perpendicular fiber orientation, and bonded with high-grade polyurethane adhesive, achieving superior delamination shear strength ($\ge 0.12\text{ MPa}$) exceeding standard discontinuous manufacturing methods.
Rather than managing split procurements, contractors source the complete envelope from one accountable manufacturer: insulated sandwich panels, cold-formed structural Z & C purlins, metal decking sheets, industrial motorized roller shutters, matching flashing profiles, and weather-seal fixings, ensuring complete color consistency and zero joint mismatch.
Situated strategically on the Arabian Sea with direct deep-water port access at Sohar and Salalah, our logistics division coordinates containerized (40ft HQ) and breakbulk break-bulk shipments directly through the Suez Canal to the Port of Piraeus (PIR) and Port of Thessaloniki (SKG). Transit time typically ranges between 10 to 14 days, minimizing project site disruption.
Every shipment is accompanied by complete mill test certificates (MTC), CE marking, tensile testing documentation, and non-combustibility certification. Greek structural engineers and project consultants receive verifiable submittal packages for expedited building control approvals.
To eliminate expensive construction waste on Greek job sites, our panels are factory-sheared to precise cut-to-length project requirements (up to 13.6 meters for standard high-cube shipping containers or specialized open-top flat racks), featuring clean-cut lap joints and pre-drilled joint options.
Our in-house technical department provides static load calculations, wind uplift simulation for Aegean island storm zones, thermal bridge analysis, and shop drawing details for flashings, parapets, and window openings before material processing begins.
Essential guidance covering regulatory compliance, transport logistics, seismic considerations, and technical customization for contractors in Greece.
Yes. All our insulated metal panels are fully tested and certified in compliance with EN 14509:2013 (Self-supporting double skin metal faced insulating panels). We supply complete Declaration of Performance (DoP) documentation, CE marking, and independent fire classification reports recognized by Hellenic Building Authorities and regional Fire Departments.
Greece’s KENAK divides the country into four climatic zones (A, B, C, D). For Northern regions (Zone D like Florina or Kozani) and Central Greece (Zone B/C), external walls typically require U-values around 0.30–0.35 W/m²K. Our 100mm to 120mm rockwool panels easily deliver U-values of 0.37 down to 0.31 W/m²K, while our 150mm configuration hits 0.25 W/m²K, meeting or exceeding national efficiency requirements.
Standard fabrication takes 10 to 18 days depending on the project volume and customized coil specifications. Marine transit from our direct port connections to the Port of Piraeus or Port of Thessaloniki generally takes 10 to 14 days via the Red Sea/Suez Canal route. Panels are packaged in seaworthy, UV-stabilized bundles with protective plastic film and reinforced corner guards.
Compared to heavy precast concrete facade panels, our rockwool sandwich panels weigh only 18 to 28 kg/m² depending on core density and gauge thickness. This significant weight reduction lowers the fundamental vibration period and seismic shear forces applied to the portal steel frame under Eurocode 8 calculations. Specially engineered slotted connections allow cyclic inter-story drift without envelope rupture.
For installations within 3 km of the sea (Piraeus, Patras, Heraklion, Volos, Rhodes), we recommend our C4/C5-M corrosion-resistant steel skins. These incorporate high zinc galvanization (Z275) with a 50µm Polyurethane-Polyamide (PUR-PA) or PVDF 70/30 finish, protecting against high saline concentration, chalking, and intense Mediterranean UV exposure.
Yes. As a comprehensive building envelope manufacturer, we supply cold-formed galvanized Z and C purlins (up to 3.0mm thickness), custom-folded architectural flashings manufactured from identical pre-painted steel coils, composite metal floor decking, translucent polycarbonate skylights, and self-drilling EPDM-bonded fasteners, ensuring absolute site compatibility.
